For Windows XP, install the first driver by Setup.exe of the printer driver. Other drivers should be installed by “Add Printers” of Windows.
For Windows Server 2003 and Vista, install drivers by "Add Printers".  

Refer to “Designate resolution” section in User’s Guide.

[ How to install multiple drivers ]

1. Install the first driver by Setup.exe

1) Double click the downloaded file to extract files.  

2) Open the extracted folder and double select Setup.exe. 

3) Select OK and the setup will begin. 

4) Select the icon of your printer model, and Select Setup.

5) Select OK

6) Enter an IP Address and port number and slect OK. 

7) Select OK

8) Select OK. 

If you don’t want to use it as the default printer, uncheck “Set as Default” and select OK. 

First printer driver setup is completed.

2. Then, install other printer drivers by Add Printers. 

1) On Windows XP, select Start>Printers and Faxes. 

2) Select Add a printer in Printer Tasks and Add Printer Wizard will open. 

3) In Add Printer Wizard, click Next. 

4) Under Local or Network Printer, select Local printer attached to this computer and click Next. 

5) Select Create a new port, and choose XPT Port (Transfer Protocol) from the pull down menu.   

6) Enter an IP Address and Port number and then select OK. 

7) Select OK

8) Select Have Disk

9) Select Browse, choose the file monitor.inf found in the Windows Driver folder on the PlotShareOneDX CD and select OK.

10) Choose the printer model of your printer and click Next. 

11) Enter Printer Name and choose either Yes or No to make this printer the default printer and click Next. 

12) Choose Do not share this printer and click Next. 

13) Choose either Yes or No for a test page and click Next.

14) Click Finish to complete Add Printer Wizard.  

15) Select Continue Anyway

16) A second printer can now be found in Printers and Faxes.